DATA SHEET AISI 310S

Stainless steels which – beside the necessary percentage of Chromium – contain a good amount of Nickel and possibly of Molybdenum.

REQUEST INFORMATION

STAINLESS STEEL

» AUSTENITIC
AISI 304

AISI 304L

AISI 304PS

AISI 309S

AISI 310S

AISI 316

AISI 316L

AISI 316Ti
» FERRITIC
» MARTENSITIC

* The values indicated in the tables are approximate and non-binding.

GO TO PRODUCTS SECTION
for thicknesses and formats available

ALTERNATIVE NAMES

ASTM	EN	UNS	JIS
310S	1.4845	S31008	SUS 310S

CHEMICAL COMPOSITION

Chemical Composition - Maximum Value
C	Mn	Si	Cr	Ni	P	Mo	Other
0.1	-	1.0	22-24	19-22	0.045	2-2.25/td>	N<0.11
Typical Value
0.08	0	0	22	20.4	0

MECHANICAL CHARACTERISTICS

Tensile Strength (MPa) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50mm) min	Hardness
Tensile Strength (MPa) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50mm) min	Rockwell B (HR B) max	Brinell (HB) max
520 (580)	205 (270)	40	95	220

END USES

AISI 310S steel is used when the end products must withstand very high temperatures. Thanks to extremely high Nickel and Chromium content (even higher than those in AISI 309S) this steel is highly resistant to corrosion at high temperatures, up to 1100 degrees in oxidising environments and up to 1000 degrees in highly reducing environments.

AISI 310S is austenitic steel which cannot be tempered and is characterised not to be magnetic in annealed or cold machining state. Typical applications are pipes and boxes for annealing. Boxes for nitriding gas turbine parts and reaction engines, parts for ovens with continuous passage.